Waterstops
Henry’s line of mastic and hydrophilic water stops bond to many different substrates. Waterstops can provide a water tight seal, excellent chemical resistance and may eliminate split forming, wiring to rebar and heat welding of splices.
-
Synko-Flex® Waterstop
- Self-sealing, non-swelling preformed joint sealant; eliminates split forming, wiring to rebar, heat welding of splices
- Unaffected by rain or moisture during installation
- Offers excellent chemical resistance
- Bonds to most substrates
- Safe for use in potable water structures
-
Carlisle MiraSTOP BW
- Vertical and horizontal concrete 8" (200 mm) thick or greater
- Shotcrete foundation walls
- High hydrostatic pressures
- Tie-back plates and penetrations
-
Carlisle MiraSTOP™ NBW
- Can be used in conjunction with CCW Waterproofing Systems and Henry Waterproofing Systems
- Easy to install
- Excellent resistance to many chemicals
- Cohesively strong
- Swells up to 400% of its original volume
-
Carlisle MiraSTOP™ IW
- Can be used in conjunction with CCW Waterproofing Systems and Henry Waterproofing Systems
- Easy to install
- Excellent resistance to many chemicals
- Cohesively strong
- Swells up to 400% of its original volume
-
Hydro-Flex® Waterstop
- Preformed, self-adhesive hydrophilic waterstop that provides a watertight seal in cold joints on concrete structures
- Eliminates split forming, wiring to rebar, heat welding of splices
- Stays flexible in cold weather
- Offers excellent chemical resistance
-
Synko-Flex® FR Waterstop
- Provides a water-tight seal around cold joints in concrete structures exposed to hydrocarbon liquids
- Eliminates split forming, wiring to rebar, heat welding of splices
- Unaffected by rain or moisture during installation
- Offers excellent chemical resistance
- Bonds to most substrates
-
Synko-Flex® Solvent Based Primer
- Penetrates concrete surfaces to provide an optimal surface for adhesion and bonding
- Applies easily by brush
- Readily penetrates concrete pores and surfaces
- Covers approximately 200 lineal feet per gallon
-
Synko-Flex® Emulsion Primer
- Penetrates concrete surfaces to provide an optimal surface for adhesion and bonding
- Applies easily by brush
- Readily penetrates concrete pores and surfaces
- Odorless and non-flammable when wet
Sorry, there are no products available based on your selection.