Stone Mason^® E-Z Flow Primer 100 is a premium water-based primer and bonding adhesive specifically formulated for priming and bonding new cement, stucco and plaster to old concrete, wood, tiles, slate, terazzo, brick and mortar surfaces. Stone Mason^® E-Z Flow Primer 100 must be used prior to the application of Stone Mason^® E-Z Flow Concrete Floor Underlayment and Super E-Z Flow Concrete Floor Underlayment.

Features

• Primes and bonds a range of new surfaces
• Prevents pinholes from forming in the new topping
• Suitable for interior and exterior use

Coverage

• 20–30 m² (200–300 sq ft) per 3.78L (1 US gallon) for 2 coats, depending on surface porosity

Surface Preparation

Remove all loose and foreign matter, dust, dirt, paint, oil, efflorescence or any other surface contaminants.

Easy Application

1. Stir contents prior to use.
2. Apply a thin, undiluted, uniform coating using a roller or soft bristle brush. DO NOT ALLOW PUDDLES TO DEVELOP.
3. Allow primer to dry tack free (approx. 30 minutes). A second thin coat is recommended for superior performance.

Coverage

20 – 30 m2 (200 – 300 sq.ft) per 3.78L (1 U.S. Gal) for 2 coats, depending on surface porosity.

Clean Up

Wash with water and soap.

Caution

Avoid direct contact with exposed skin. If contact occurs, wash promptly with soap and water. If product comes in contact with eyes, rinse immediately and repeatedly with water and if swallowed drink two glasses of water and get prompt medical attention.

KEEP OUT OF REACH OF CHILDREN

KEEP FROM FREEZING

The consumer shall satisfy themselves of the suitability of this product for the intended purpose. Weather, applicator's skill and surface conditions are beyond manufacturer's control. We, therefore, limit our liability to replacement of defective material only, within one year of proof of purchase.