Stone Mason^® Multi-Purpose Primer is a superior quality latex primer that seals and prepares a wide range of surfaces for flooring and wall coverings. Use over concrete, wood, drywall and masonry.

Features           

• Improves adhesion
• Water-based
• Fast drying
• Dries to a clear finish

1. Remove any loose materials and thoroughly clean and dry surfaces.
2. Stir contents prior to use.
3. Apply a thin uniform coating using a roller or soft bristle brush. DO NOT ALLOW PUDDLES TO DEVELOP.
4. Allow primer to dry tack free (approx. 30 minutes). A second thin coat is recommended for superior performance.
5. Allow surface to dry for 8 hours prior to the installation of floor or wall coverings.

Coverage

300-500 sq. ft (27 - 46 m2) per 1 US Gal (3.78 L) depending on surface porosity.

Clean Up

Wash with water and soap.

Caution

Avoid direct contact with exposed skin. If contact occurs, wash promptly with soap and water. If product comes in contact with eyes, rinse immediately and repeatedly with water and if swallowed drink two glasses of water and get prompt medical attention.

KEEP OUT OF REACH OF CHILDREN

KEEP FROM FREEZING

The consumer shall satisfy themselves of the suitability of this product for the intended purpose. Weather, applicator's skill and surface conditions are beyond manufacturer's control. We, therefore, limit our liability to replacement of defective material only, within one year of proof of purchase.