Black Knight^® Driveway Resurfacer smooths and repairs cracked and weathered asphalt surfaces quickly and easily, preparing the surface for Black Knight^® Driveway Sealer application.

Application

REMOVE all dirt and loose material with a stiff brush or water. Clean oil spots and stains with Black Knight Asphalt and Concrete Cleaner. STIR Black Knight Driveway Resurfacer thoroughly before each application. LIGHTLY dampen surface; do not leave any standing water. FILL all larger and deeper cracks with Black Knight Crackfiller and allow to dry. DEPRESSIONS should also be filled with Black Knight Depression Filler. Black Knight Driveway Resurfacer should then be applied in a layer of up to 1/4” (0.6 cm) thickness; apply firmly with a trowel or putty knife and allow to dry for approximately 24 to 48 hours, or until hard.

Drying Time

Dries in approximately 24 hours. Do not apply when rain is forecasted within 24 hours.

Coverage

One U.S. Gal./3.78 Litres covers approximately 6 sq. ft. (0.6 sq. m.) at 1/4”(0.6 cm) thickness.

Clean Up

Clean up equipment and spills before Black Knight Asphalt Driveway Resurfacer dries with water and/or soap. If product dries, use Stone Mason^® Degreaser to clean up.

Limitations

Do not apply if temperature is below 50°F ( 10°C ). Not recommended for steeply inclined driveways as surface may become slippery when wet.

KEEP FROM FREEZING

KEEP OUT OF REACH OF CHILDREN

CAUTION

Avoid eye and skin contact, wear protective eyewear and gloves.

The consumer shall satisfy themselves of the suitability of this product for the intended purpose. Weather, applicator's skill and surface conditions are beyond manufacturer's control. We, therefore, limit our liability to replacement of defective material only, within one year of proof of purchase.