Henry - A Leader in Building Envelope Systems
Printer-friendly versionSend by email

Stone Mason® Premium Concrete Sealer

Stone Mason® Premium Concrete Sealer protects and maintains the appearance of concrete floors, paving stones, quarry tiles, masonry, concrete blocks and bricks. This extremely durable, water-based clear acrylic sealer helps reduce dust accumulation on concrete and resists gasoline, motor oil and automotive chemicals. Also protects against de-icing salt and spalling due to repeated freeze/thaw cycles.

Features

  • Easily applied by roller or low-pressure spray
  • Dries to a clear, matte finish
  • Will not chip, peel or discolour
  • Suitable for exterior and interior use

Coverage

  • 3.78 litres per 20–49m2; up to 93m2 on smooth concrete
  • Full coverage may not be achieved on irregular surfaces

MSDS Sheets

Stone Mason® Premium Concrete Sealer MSDS Sheet Download PDF Add to BES Binder    
 

Instructions

  1. For all surfaces, first sweep with a broom, ensuring entire surface is free of dust and dirt.
  2. Remove all white powdery residue and rust stains with Stone Mason® Efflorescence and Rust Remover.
  3. Clean surface thoroughly and remove all oil, gasoline and grease stains using Stone Mason® All Purpose Concrete Cleaner.
  4. Rinse surface clean with fresh water and let thoroughly dry.
  5. Apply a thin, uniform coating of sealer, using either a deep-piled roller, brush or low-pressure sprayer.
  6. For maximum durability and resistance to spills, two coats are recommended.
  7. Let dry at least one hour between coats and before allowing traffic.
  8. Avoid heavy coats as this may lead to discolouration.
  9. Minimum application temperature is 10°C (50°F)

Tips

  1. Promptly clean all spills on sealed surfaces with Stone Mason® All Purpose Cleaner.
  2. Apply in warm weather (20°C, 70°F) and when no rain is forecasted for 24 hours.
  3. Two light applications will provide a superior seal and protection than a single, heavy application.

Curing Concrete

Stone Mason® Premium Concrete Sealer forms a moisture impermeable film for effective water retention and proper curing of new concrete.

Coverage

3.78 L of Stone Mason® Premium Concrete Sealer covers from 20 – 49 m2 & up to 93 m2 on smooth concrete. Full coverage may not be achieved on irregular surfaces.

CAUTION

Danger, Poison. May be harmful or fatal if swallowed. Keep out of reach of children. If taken internally, consult a physician immediately. Keep from freezing.

The consumer shall satisfy themselves of the suitability of this product for the intended purpose. Weather, applicator's skill and surface conditions are beyond manufacturer's control. We, therefore, limit our liability to replacement of defective material only, within one year of proof of purchase.


©  Henry Company. All rights reserved.

Privacy Policy  |  Terms of Use  |  Site Map  |  Contact