Stone Mason^® All-Purpose Concrete Cleaner removes dirt, grease, oil and gasoline from asphalt, masonry, brick, slate, flagstone, patio tiles, wooded decks, vinyl siding, garden tools, whitewall tiles and machinery. Recommended for use before the application of a driveway sealer.

Features

• Effective on a wide range of surfaces
• Acid-free, non-toxic, non-flammable formula
• Will not harm lawns

Required Tools and Materials

• Mixing pail
• Mop or scrub brush

To ensure our customers always have access to the most current information, we ask that you contact the Henry Company Customer Support Center at 1-800-486-1278 for more information about this product.

For Cleaning Driveways

Wet driveway with water. Dilute cleaner with water according to guide below. Apply with a brush, and let stand on surface for 1 to 5 minutes. Scrub, and rinse with clean water. Repeat application if necessary.

For General Cleaning

Mop or brush cleaner onto soiled surface, then rinse clean.

Dilution Guide

Use only freshly mixed formula.

Heavy Cleaning

For driveways, mix equal parts of cleaner and water or use cleaner full-strength.

Medium Cleaning

4 parts water to 1 part cleaner. Light Cleaning: 6 parts water to 1 part cleaner.

The consumer shall satisfy themselves of the suitability of this product for the intended purpose. Weather, applicator's skill and surface conditions are beyond manufacturer's control. We, therefore, limit our liability to replacement of defective material only, within one year of proof of purchase.