Stone Mason® Vinyl Cement Patch
Stone Mason® Vinyl Cement Patch is a strong, cement-based, all-purpose, polymer-fortified concrete patch and repair mortar. Trowelable and easy to mix and use, Stone Mason® Vinyl Cement Patch strongly adheres to any vertical or horizontal concrete or masonry surface, including sidewalks, driveways, steps, walkways, floors, or walls.
Required Tools and Materials
Cut out all cracked, chipped and deteriorated concrete, until a sound surface is obtained. Clean area free of dust, dirt and oily contamination. Rinse surface area with clean water, leaving a damp, puddle-free surface.
To each 25 lb. (11.3 kg) bag add approximately 1¼ to 1½ quarts (1¼ to 1½ litres) clean water. Stir and mix slowly to putty-like consistency. Let stand for 5 minutes, then remix. Do not overwater as this will reduce the adhesion and strength properties.
Using a trowel, place the Stone Mason® Vinyl Cement onto the dampened surface, applying pressure to ensure a complete bond. Level and then smooth. Build up in separate layers, in ¼" to ½" (0.6 to 1.3 cm) increments to reduce shrinkage and cracking.
Apply in temperatures above 5°C (40°F)
The consumer shall satisfy themselves of the suitability of this product for the intended purpose. Weather, applicator's skill and surface conditions are beyond manufacturer's control. We, therefore, limit our liability to replacement of defective material only, within one year of proof of purchase.