Formulated to reduce the time and effort needed to set fence posts, Stone Mason^® Instant Post Cement is a cement-based, fast-setting anchoring cement. Cost-effective and easy to use with metal, wood and plastic deck posts, fence posts and mail boxes.

Features

• Reduces time, effort and labour
• Requires no messy mixing
• Posts are set in minutes instead of days
• Lasts as long as concrete
• Resists frost and soil acids

Required Tools and Materials

• Gloves
• Tamper
• Level

To ensure our customers always have access to the most current information, we ask that you contact the Henry Company Customer Support Center at 1-800-486-1278 for more information about this product.

Directions

Dig post hole deeper than frost line, and use Instant Post Cement only when temperature is above 5°C (40°F). Determine hole diameter and depth. Consult project chart to determine how many bags of cement are needed.

Application Steps

1. Empty 3/4 of required amount of water into post hole.
2. Pour the remaining amount of cement into the post hole in a circular motion around the post to achieve consistent blending. Then tamp mixture.
3. Using a level, adjust the post to desired alignment and tamp to set post. Instant Post Cement will set in approximately 10 minutes.
4. Use 1 gallon (3.78 litres) clean water per 40 lb. (18kg) bag. Yield .398 cubic feet.

Maintenance

Work should be inspected periodically. If any problems are found, they should be corrected as they develop. This will result in an economically priced and long lasting installation.

For Best Results

• Follow step-by-step directions.
• Use 1 gallon/3.78 litres of clean water for each 40lb. (18.1 kg) bag.
• Water required may vary due to soil consistency.
• Holes should be dug below frost line.
• Hot weather will slightly shorten set time. Cool weather will lengthen the time need to set.
• Temperature should be 5°C (40°F) or higher.

The consumer shall satisfy themselves of the suitability of this product for the intended purpose. Weather, applicator's skill and surface conditions are beyond manufacturer's control. We, therefore, limit our liability to replacement of defective material only, within one year of proof of purchase.