Stone Mason® Surface Bond Fibre Cement
Surface Bond Fibre Cement is a fortified, surface-applied mortar with superior compressive, tensile and flexural strengths. Suitable for use on interior/exterior walls, concrete flooring and foundations.
Required Tools and Materials
To ensure our customers always have access to the most current information, we ask that you contact the Henry Company Customer Support Center at 1-800-486-1278 for more information about this product.
Surface must be structurally sound, clean and free of dirt, paint, oil, dust or any material that will prevent good bonding.
Mix approximately 1 ½ gallons (5 ½ litres) of clean water per 50 lb. (22.7 kg) bag. Do not mix more material than can be applied in one hour. Power mixing is recommended. Approximate mixing time is 2-3 minutes. Mix to lump-free consistency, suitable for troweling. For increased strength add Stone Mason® Acrylic Bond as part of the mixing liquid.
Do not apply when temperature is expected to fall below 40°F (5°C) within 24 hours.
Dampen concrete surface and trowel cement using an upward stroke to achieve a minimum thickness of 1/8" (3.2 mm).
Finished surface should be misted with water once or twice a day under normal conditions, more frequently if weather is hot and dry. Protect from rain by covering with plastic for the first 8 hours after application.
The consumer shall satisfy themselves of the suitability of this product for the intended purpose. Weather, applicator's skill and surface conditions are beyond manufacturer's control. We, therefore, limit our liability to replacement of defective material only, within one year of proof of purchase.